| |
| |
|
|
|
| Ruggedly
constructed fans designed and manufactured to endure severe
operating conditions. Fans are capable of developing differential
pressures of 125” Wg (4.5 PsiG) per casing and flows
to 125,000 CFM. Units are available in nominal, gas tight
and absolute zero leakage construction with a variety of metallurgies
suitable for handling corrosive gases, as well as wide temperature
extremes ranging from low cryogenic to as high as 1,100°
F. |
| |
|
|
| |
|
| |
 |
| |
| 
|
|
| Non-contaminating,
process air and gas, diaphragm compressors with compression
ratios as high as 15:1 per stage. Ideally suited for applications
handling rare or toxic gases where positively no leakage or
contamination is essential. Head Integrity Detection Systems
monitors diaphragm group and process seal. Complete skid mounted
systems are available with flows from less than 1 to more
than 150 inlet CFM and with discharge pressure to 30,000 PsiG. |
| |
|
|
| |
|
| |
 |
| |
| 
|
|
| Multi-Stage
centrifugal blowers for air or gas handling applications.
Driven through either the inlet or outlet side, units are
rated for flows as high as 41,000 CFM and pressures from a
few inches of water gauge to 25 PsiG per casing or vacuums
of 1” to over 15” Hg. The blowers are inherently
oil free in design and are available with shaft seal options
suitable for inert, combustible, toxic or corrosive gases
with inlet temperatures from 0 to 200° F. |
| |
|
|
| |
|
| |
 |
| |
|
|
|
| Single
and multi-stage, water-cooled, process, piston compressors
built to comply with industry standards and/or API-618 specification.
Non-lubricated, mini-lubricated and lubricated cylinder construction
is available with metallurgies suitable for handling toxic,
corrosive, rare and hard-to-handle gases. Frame sizes to 1,760
HP with flows from 10 to 6,000 inlet CFM and operating pressures
to 3,700 PsiG. Available as skid mounted, packaged assemblies
with ancillary components. |
| |
|
|
| |
|
| |
 |
| |
|
|
|
| Air
cooled, single and two stage, non-lubricated “Dry Cylinder”
type, process air and gas, piston compressors. Flow rates
range from 2 to 100 inlet CFM with discharge pressure to 600
PsiG. Typical applications include vapor recovery, liquid
gas transfer, tank car unloading, pilot plant processes, oil-free
instrument air and differential liquid transfer. Standard
low cost packages available including suction liquid traps
and instrumentation components. |
| |
|
|
| |
|
| |
 |
| |
|
|
|
| Custom
designed ASME Code (TEMA B, C or R designs) heat transfer
equipment and standardized off-the-shelf non-code heat exchangers.
Shell-in-tube designs from 6'' to 30'' diameter. AIM's engineering
and sales personnel have over 25 years of technical experience
in rating, designing and applying this equipment. AIM was
created and has continued to grow because of customer's needs
for fast estimating service and on-time delivery of a quality
product. |
| |
| |
| |
|
| |
 |
| |
| 
|
|
| Designer-manufacturer
of custom and off-the-shelf industrial silencers, separators,
intake filters and pulsation dampeners. Major market segments
include: Vent and Blowdown Silencers, Reciprocating Compressor
Silencers, Vacuum Pump Separators, Air Intake Filter Silencers,
Engine Silencers, Centrifugal Compressor Silencers, Rotary
Positive Blower Silencers and Gas Turbine Silencers. Vanec
also provides field service intended to diagnose noise, vibration
or pulsation problems. |
| |
| |
| |
|
| |
 |
|
|
